Passivation treatment of enamel reactor
Contact with the enamel reactor may know it is a corrosion-resistant equipment, and enamel reactor performance is relatively stable. Equipment may be passivated after long-term use, which may affect our use. Let’s look at the passivation of the knowledge. Some friends of enamel reactor equipment passivation treatment is not very clear. This is really a […]
Method of heating rate of enamel reactor
Select special insulation cotton, the enamel reactor wrapped up, play a heat insulation effect, can effectively prevent excessive temperature loss, to provide heating speed. Second, the solution in the reaction tank of enamel reactor is not filled up once, so the heating rate can be affected by intermittent adding method, the first adding liquid is […]
How to reduce the number of glass-lined equipment
During the manufacture of glass-lined equipment, a lot of internal stress will be produced because of the drum, stamping and welding. These stresses should be eliminated by heat treatment before the bottom glaze is fired, which will reduce the times of firing, ensure the production efficiency of glass-lined equipment. 1, glass-lined equipment porcelain layer thickness […]
How to prevent the enamel enamel reactor off
How to prevent enamel from falling off? That’s what we’re going to tackle in this issue. The answer to this question lies in the following explanation. Please see the summary below. 1. Avoid vibration and external shock during transport in enamel reactor. 2. When using the reactor, do not add particles, even if added, do […]
How to conduct non-destructive testing of glass lined reactor
1. Before non-destructive testing, the welded joint shall pass the inspection of shape, size and appearance. The image of the non-standard state of the surface on the negative shall not cover up or interfere with the image of the defect. Therefore should carry on the necessary arrangement to the detection spot. 2. Class A and […]
Four methods of obtaining high temperature in enamel reactor
Enamel reactor commonly known as glass-lined reactor, because of its advantages, the price is relatively low, so in many industries, pharmaceuticals, printing and dyeing, agriculture, wine, chemical industry, such as the replacement of stainless steel, Non-ferrous metal, plastic and other chemical equipment. The equipment is made of vitreous enamel with high silicon content, which is […]
Damage and repair of enamel reactor
The enamel reactor is made of several materials and needs to be treated at high temperature, but it will inevitably be damaged when used. Don’t panic at this time, we can take remedial measures. The following is an introduction to the damage and maintenance of equipment. Equipment Damage Mechanical damage, thermal stress damage, processing stress […]
Daily inspection and maintenance of enamel reactor
1, Listen to the enamel reactor reducer and motor sound is normal, start-up temperature of reducer, motor and bearing of machine base: general temperature ≤40°C, high temperature ≤60 °C (it is normal that the back of hand can stay on for more than 8 seconds) . 2, Often check the reducer oil leakage phenomenon, whether […]
Causes of thermal stress damage of enamel reactor
Enamel reaction tank is usually used in petrochemical, rubber, pesticide, dye, pharmaceutical and other industries, complete organic dyes and intermediates of sulfonation, nitration, hydrogenation, alkylation, polymerization, condensation and other processes and equipment. Low pressure reactor generally refers to 1.6 MPA below the reactor. The enamel glass is baked at 900 °C and bonded to steel […]
Taiji enamel equipment company obtained the national three types of pressure vessel manufacturing license
After a thorough General Administration of Quality Supervision, Inspection and Quarantine Review of our company, it has been confirmed that tai chi enamel equipment company is fully qualified to produce all three types of pressure vessels. On November 22,2007, the company obtained the“People’s Republic of China special equipment （three types of pressure vessels） manufacturing license”. […]
