What are the requirements of enamel reactor for coating
As we all know, enamel reactor is a kind of anticorrosion equipment, widely used in various industries. In many anti-corrosion equipment, enamel reactor life is relatively long, this is only in our choice of materials under the right circumstances. But if our reactor equipment to choose the sub-standard coating, may affect its service life, then […]
What are the methods to distinguish the new and old enamel reactor
Enamel reactor manufacturers in the purchase of reactor, usually have to carry out a series of inspection, in order to ensure that the equipment is new, general inspection methods are diverse, here, we briefly introduce to us the common enamel reactor manufacturers purchase equipment when the choice of viewing method. Can first look at the […]
The use of enamel reactor is closely related to its performance
The enamel reactor is made by lining the inner surface of the steel container with glass containing high silicon dioxide, which is solidly adhered to the metal surface by high temperature. Therefore, it has the dual advantages of glass stability and metal strength, is an excellent corrosion-resistant equipment. The use of the reactor is closely […]
The reason and solution of the abnormal sound of enamel reactor
Enamel reactor is a kind of chemical equipment used for reaction of chemical raw materials. Strange sounds sometimes occur while the device is running, so what are the reasons for this? Many of my friends are confused. When the abnormal sound is serious, it will affect the normal operation of the machine. Here’s a brief […]
Selection of agitator for glass lined reactor
The agitator is one of the most important parts of the reactor equipment. How to select the agitator is the premise to ensure the normal operation of the glass-lined reactor in the later stage, to know if the agitator to achieve the glass-lined reactor and the outside completely isolated, thus achieving high temperature, glass-lined under […]
Passivation treatment of enamel reactor
Contact with the enamel reactor may know it is a corrosion-resistant equipment, and enamel reactor performance is relatively stable. Equipment may be passivated after long-term use, which may affect our use. Let’s look at the passivation of the knowledge. Some friends of enamel reactor equipment passivation treatment is not very clear. This is really a […]
Method of heating rate of enamel reactor
Select special insulation cotton, the enamel reactor wrapped up, play a heat insulation effect, can effectively prevent excessive temperature loss, to provide heating speed. Second, the solution in the reaction tank of enamel reactor is not filled up once, so the heating rate can be affected by intermittent adding method, the first adding liquid is […]
How to reduce the number of glass-lined equipment
During the manufacture of glass-lined equipment, a lot of internal stress will be produced because of the drum, stamping and welding. These stresses should be eliminated by heat treatment before the bottom glaze is fired, which will reduce the times of firing, ensure the production efficiency of glass-lined equipment. 1, glass-lined equipment porcelain layer thickness […]
How to prevent the enamel enamel reactor off
How to prevent enamel from falling off? That’s what we’re going to tackle in this issue. The answer to this question lies in the following explanation. Please see the summary below. 1. Avoid vibration and external shock during transport in enamel reactor. 2. When using the reactor, do not add particles, even if added, do […]
How to conduct non-destructive testing of glass lined reactor
1. Before non-destructive testing, the welded joint shall pass the inspection of shape, size and appearance. The image of the non-standard state of the surface on the negative shall not cover up or interfere with the image of the defect. Therefore should carry on the necessary arrangement to the detection spot. 2. Class A and […]
