How to prevent the enamel enamel reactor off

How to prevent enamel from falling off? That’s what we’re going to tackle in this issue. The answer to this question lies in the following explanation. Please see the summary below.

1. Avoid vibration and external shock during transport in enamel reactor.

2. When using the reactor, do not add particles, even if added, do not stir, so as not to damage the enamel surface. If there are minor problems, such as enamel shedding and cracks, should be immediately repaired with JS916.

3. Prevent solvent corrosion enamel reactor metal body, cause unnecessary shutdown and equipment scrap.

Four. The reactor in the use of the process, if due to improper maintenance and large areas off, it is recommended to return to the factory re-glazing.

Four. The reactor is a low-carbon steel tire surface spraying high silicon content of enamel, after 900 degrees of high temperature baking, so that the enamel is tightly attached to the surface of metal steel tire.

5. Because of the mechanical and physical properties of the two materials are different, enamel reactor damage is also a variety of reasons. There are generally the following reasons for mechanical damage, working temperature, processing stress damage, electrostatic breakdown, hydrogen corrosion, substrate unqualified.

These are the main contents of the enamel reactor. The operating temperature of the reactor has a great influence on the use of the glass-lined reactor. If the stress produced by the enamel exceeds the applied stress due to a large change in temperature, the enamel will be destroyed.